RC11 Air Mouse Calibration

Liimon
Posts: 1
Joined: Thu Nov 29, 2012 8:53 am

RC11 Air Mouse Calibration

Postby Liimon » Thu Nov 29, 2012 9:12 am

I was unable to calibrate my RC11 Air Mouse by following the instructions in the manual. The cursor would always move up and to the right on the screen, even after I followed the instructions in the manual (press and hold up, down, enter simultaneously; release them and then plug in the receiver dongle.)

When I asked for a refund, the seller told me to place the controller on a flat surface and then hold down the left and G keys for 3 seconds to reset the gyroscope.

It worked! I hope this information will be useful to others who have the same problem or want to recalibrate their gyroscope chips.

Lee

kulkuri
Posts: 1
Joined: Thu Nov 29, 2012 1:47 pm

Re: RC11 Air Mouse Calibration

Postby kulkuri » Thu Nov 29, 2012 1:55 pm

thanks for the heads up, now I have mine working too...

rurocking
Posts: 1
Joined: Tue Apr 30, 2013 9:25 am

Re: RC11 Air Mouse Calibration

Postby rurocking » Tue Apr 30, 2013 9:31 am

Liimon wrote:place the controller on a flat surface and then hold down the left and G keys for 3 seconds to reset the gyroscope.


Excuse my stupidity here, but when you say "Left keys" are you referring to the key used as the left mouse button?

Harry2312
Posts: 8
Joined: Wed Mar 06, 2013 3:46 am

Re: RC11 Air Mouse Calibration

Postby Harry2312 » Fri May 10, 2013 6:12 am

Having problem in rc11..
Mk808b is detecting the dongle but there is no cursoron screen...even tried on pc but same problem..
One strange thing was red light instead of blue one once...can someone tell me what this red light means...and how to solve this problem...

enviro8
Posts: 25
Joined: Sat Nov 03, 2012 7:23 pm

Re: RC11 Air Mouse Calibration

Postby enviro8 » Thu May 16, 2013 7:02 pm

When the blue light changes to red and there is no cursor, it means, at least on mine, flat batteries.

Alternately, if using rechargeable batteries, change to alkaline.

demokedes
Posts: 23
Joined: Fri Feb 01, 2013 3:27 am

Re: RC11 Air Mouse Calibration

Postby demokedes » Wed Jun 19, 2013 6:56 am

I also have problem with air mouse. My problem is not cursor, but signs typed. Sometimes there is nothing, smetimes there are more than one letter typed, when I press only once.
Any ide?


Return to “MK808”

Who is online

Users browsing this forum: No registered users and 2 guests